Z3N Series of color mark sensor (Z3N-TB22)
Z3N Series of color mark sensor
Model list
|
Type |
Light source |
Cable |
Type |
Light source |
cable |
|
TR22 |
Red |
Four wire |
TR2 |
Red |
Three wire |
|
RG22 |
green |
Four wire |
RG2 |
green |
Three wire |
|
T22 |
Red+green |
Four wire |
T2 |
Red+green |
Three wire |
|
TB22 |
Green+bule |
Four wire |
TB2 |
Green+bule |
Three wire |
|
TW22 |
Green-white |
Four wire |
TW2 |
Green-white |
Three wire |
Main technical parameters
|
Test type |
Coasial reflection |
Load current |
200Ma (max) |
|
Detect distance |
10mm±2mm |
Circuit protection device |
VS voltage of anti-polarity protection, output is short circuit protection.When electric current load L＞200mA switch automaticcally jump at open, the L ≤200Ma when the signal is automatically replies. At the same time anarbitrary line on the wrong protection. |
|
Supply voltage |
DC 10-30V±10% belllows＜10% |
||
|
Current consumption |
＜45mA |
||
|
Source chromatography |
Red,green,blue (root zelkowa acuminata models table selection) |
Sensitivity |
Single cyde adjust |
|
spot |
Ф0.5~Ф1.5 |
Anti-enviroment light |
Incandescent＜3000LX Sunlight 10000LX |
|
Detection of perspective |
Special lighting and measured the vertical surface to allow poor imitation±15° |
Protection level |
IP67,Moisture-proof dust |
|
Response time |
0.1~1ms |
temperature |
Operation:-15°C~ 65°C Save: -15°C~ 80°C |
|
Output |
Light darkcan select |
Case material |
Engineering plastic |
|
Output instructions |
(Red) LED |
Raises thread |
Ф5.4PVC four core sheath shield 2m long cable standards |
|
Output voltage |
(High)vs-≤1.5，low≤1.2V |
weight |
About 300g |